Question

Calls cannot be made between two sites using either an IP trunk or Remote PIM.

Answer

The following commands need to be taken in to account when using an IP-PAD without VCT cards:

CM0A09 > LAN Interface Number e.g. 01 : IP Location Number e.g. 01 (This command puts the IP-PAD into an IP location)

CM6719 > IP Location Number e.g. 01 : 02 (This command sets the IP loaction to not use any VCT cards)

Once you have set these commands you will need to reset the IP-PAD by switching the toggle switch on the IP-PAD.